You are viewing an older version of this section. View current production version.
Join the SingleStore Community Today
Get expert advice, develop skills, and connect with others.

Data Types

MemSQL supports the following data types. The sizes given are for in-memory rowstore tables. Columnstore (on-disk) tables are stored differently, and often compressed.

Integer Numbers

Data Type Size Size (Not Null) Synonyms Min Value Max Value
BOOL* (see note below) 2 bytes 1 byte BOOLEAN -128 127
BIT 9 bytes 8 bytes
TINYINT 2 bytes 1 byte -128 127
SMALLINT 4 bytes 2 bytes -32768 32767
MEDIUMINT 4 bytes 3 bytes -8388608 8388607
INT 8 bytes 4 bytes INTEGER -2147483648 2147483647
BIGINT 12 bytes 8 bytes -2 ** 63 (2 ** 63) - 1

Remarks

BOOL and BOOLEAN are synonymous with TINYINT. A value of 0 is considered FALSE, non-zero values are considered TRUE.

The format: INT(x) (for example, INT(5)) is used to specify display width and not the size of the integer. Display width is not directly used within MemSQL but may be used by some clients.

Info

Each integer type can be “unsigned”, doubling the positive range of values and disallowing values under 0.

Real Numbers

Data Type Size Size (Not Null) Synonyms Precision
FLOAT 4 bytes 4 bytes 23 bits
DOUBLE 8 bytes 8 bytes REAL 53 bits
DECIMAL see note see note DEC, FIXED, NUMERIC 65 digits
Info

The space consumed by the DECIMAL datatype varies with the precision and scale arguments. The syntax for defining a DECIMAL (or its synonyms DEC, FIXED, and NUMERIC) is in the form DECIMAL(P, S) where P is the total number of digits (precision) and S (scale) is how many of those digits appear after the decimal point. For example, DECIMAL(10,5) will store numbers with 5 digits before the decimal and 5 after.

The formula for the number of bytes used to store a decimal value is (ceil((P - S) / 9) + ceil(S / 9)) * 4. So, for our example, it would be (ceil((10 - 5) / 9) + ceil(5 / 9)) * 4, or 8 bytes.

Info

For FLOAT and DOUBLE, precision refers to the number of bits in the significand.

Working with Floats and Doubles

FLOAT and DOUBLE represent approximate values and MemSQL follows IEEE 754 standards (see FLOAT | see DOUBLE) for floating point numbers.

The precision listed in the Real Numbers table refers to the number of bits used to store the significand. For FLOAT, 23 bits is about 6 digits. For larger numbers (up to 53 bits) use DOUBLE, which stores up to 14 digits.

Numbers exceeding the precision of the data type are rounded according to the IEEE 754 standard when entered. For example:

CREATE TABLE t (id float);
INSERT INTO t VALUES (123456);
INSERT INTO t VALUES (1234567);
SELECT * FROM t;

****
+---------+
| id      |
+---------+
| 123456  |
| 1234570 |
+---------+

Time and Date

Data Type Size Size (Not Null) Resolution Min Value Max Value
DATE 8 bytes 4 bytes day 1000-01-01 9999-12-31
TIME 8 bytes 4 bytes second -838:59:59 838:59:59
TIMESTAMP 4 bytes 4 bytes second 1970-01-01 00:00:01 2038-01-19 03:14:07
TIMESTAMP(6) 8 bytes 8 bytes microsecond 1970-01-01 00:00:01.000000 2038-01-19 03:14:07.999999
DATETIME 12 bytes 8 bytes second 1000-01-01 00:00:00 9999-12-31 23:59:59
DATETIME(6) 12 bytes 8 bytes microsecond 1000-01-01 00:00:00.000000 9999-12-31 23:59:59.999999
YEAR 2 bytes 1 byte year 1901 2155

Note: It is recommended to use DATETIME or DATETIME(6) column types instead of TIMESTAMP or TIMESTAMP(6) because TIMESTAMP types only support dates through 2038-01-19 as opposed to 9999-12-31 for DATETIME types. This can avoid the need to do potentially time-consuming application and database maintenance and conversion in the future.

Inserting or Updating a Column With the Current Timestamp

To allow inserts or updates of a TIMESTAMP or TIMESTAMP(6) column with the current timestamp, define the column using the DEFAULT CURRENT_TIMESTAMP clause or ON UPDATE CURRENT_TIMESTAMP clause. Use the former clause to allow inserts of the current timestamp and the latter clause to allow updates of the current timestamp.

The following example demonstrates the use of DEFAULT CURRENT_TIMESTAMP and ON UPDATE CURRENT_TIMESTAMP in column definitions:

CREATE TABLE s(id INT, ts TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
ts2 TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP(6) ON UPDATE CURRENT_TIMESTAMP(6),
ts3 TIMESTAMP);
INSERT INTO s(id) VALUES(1);
INSERT INTO s(id) VALUES(2);
SELECT * FROM s;
****
+------+---------------------+----------------------------+------+
| id   | ts                  | ts2                        | ts3  |
+------+---------------------+----------------------------+------+
|    1 | 2020-02-20 11:18:02 | 2020-02-20 11:18:02.822309 | NULL |
|    2 | 2020-02-20 11:18:13 | 2020-02-20 11:18:13.767739 | NULL |
+------+---------------------+----------------------------+------+
Warning

Prior to MemSQL 6, when you inserted or updated a record, the first TIMESTAMP or TIMESTAMP(6) column would automatically be populated with the current timestamp. Such columns did not use DEFAULT CURRENT_TIMESTAMP or ON UPDATE CURRENT_TIMESTAMP clause in their column definitions. In MemSQL 6 and later, this behavior has been deprecated; TIMESTAMP or TIMESTAMP(6) columns without these clauses will be populated with a NULL value instead of the current timestamp. For instance, NULL values are populated in the ts column in the following example, when run on MemSQL 6 or later.

CREATE TABLE r(d DATETIME(6), ts TIMESTAMP(6), id INT);

INSERT r(d, id) VALUES("2017-07-01", 1);

SELECT * FROM r;
****
+----------------------------+----------------------------+------+
| d                          | ts                         | id   |
+----------------------------+----------------------------+------+
| 2017-07-01 00:00:00.000000 | NULL                       |    1 |
+----------------------------+----------------------------+------+
UPDATE r SET id = 2 WHERE id = 1;

SELECT * FROM r;
****
+----------------------------+----------------------------+------+
| d                          | ts                         | id   |
+----------------------------+----------------------------+------+
| 2017-07-01 00:00:00.000000 | NULL                       |    2 |
+----------------------------+----------------------------+------+

String Types

Fixed-Length String

There are three fixed-size string types in MemSQL. The space consumed is directly proportional to their length definitions. Values of type CHAR require 3 x LENGTH bytes of memory, as MemSQL supports only the UTF8 character set. Values of type BINARY require LENGTH bytes of memory. char(0) not null and binary(0) not null still allocate 1 byte.

Data Type Size Size (Not Null)
CHAR(LENGTH) 3*LENGTH + 1 bytes 3*LENGTH bytes
BINARY(LENGTH) LENGTH + 1 bytes LENGTH bytes

A column declared as CHAR() stores values as per the defined length. When CHAR values are stored, they are right-padded with spaces to the specified length but when the CHAR values are retrieved, trailing spaces are removed.

CREATE TABLE t1 (c1 CHAR(3));

INSERT INTO t1 VALUES ('  ');
INSERT INTO t1 VALUES ('ab ');
INSERT INTO t1 VALUES ('abcd');

SELECT c1, LENGTH (c1) FROM t1;
****
+------+-------------+
| c1   | LENGTH (c1) |
+------+-------------+
| abc  |           3 |
| ab   |           2 |
|      |           0 |
+------+-------------+

Variable-Length Strings

There are several variable-length string types. The data for these variable types are stored in a memory allocation designed for them, and pointers to their locations in memory are stored in the main table structure. This means that the space consumed by a particular value is the byte length of the string, plus an 8-byte overhead for the pointer, and a 4-byte overhead for storing the length. (There is an additional 4-byte overhead if the field is nullable.) One exception is values less than 7 bytes long. Those small values are stored directly in the pointer area.

The three main types are VARCHAR, VARBINARY, and LONGTEXT. While they all operate similarly for most English-language alphanumeric strings, there are several important differences in their behavior. The length limit of the VARCHAR is measured in Unicode characters, not in bytes. VARBINARY fields store data verbatim, regardless of whether they are valid Unicode strings. Sorting and comparing a VARBINARY uses the exact binary representation.

To reduce fragmentation, allocations for variable sized data use sizes from a fixed list in multiples of eight (16, 32, 40, etc.). Variable data of other lengths is rounded up to the next nearest, so a ten (10) byte string would allocate sixteen (16) bytes.

Data Type Max Length
VARCHAR 21,845 characters
VARBINARY system RAM
LONGTEXT 4 GB
Info

There are several variants of the BLOB and TEXT types, listed below. Aside from their maximum lengths, there is no practical difference between these types in MemSQL, including performance or memory efficiency. They are implemented solely for backwards compatibility with MySQL syntax.

Name Max Length Description
LONGBLOB 4 GB VARBINARY
MEDIUMBLOB 16 MB VARBINARY
BLOB 65,535 bytes VARBINARY
TINYBLOB 255 bytes VARBINARY
MEDIUMTEXT 16 MB LONGTEXT
TEXT 65,535 bytes LONGTEXT
TINYTEXT 255 bytes LONGTEXT

JSON Type

The JSON type can contain any valid Javascript Object Notation data, including maps, arrays, and nested types. For more information see the JSON Guide .

Data Type Size Size (Not Null)
JSON 20 bytes + data size 16 bytes + data size

Geospatial Types

Geospatial types contain information about points, paths, and polygons on the surface of the Earth. For more information, see the Geospatial Guide.

Data Type Size Size (Not Null)
GEOGRAPHYPOINT 8 bytes 8 bytes
GEOGRAPHY See note
Info

The space consumed by the path and polygon data in Geography columns is dependent on the complexity of the objects. Very roughly, a Geography value consumes 24 bytes per vertex, plus a 64 byte overhead, plus some minor overhead for each “ring” in a multipolygon.

Indexing a Geography object may also consume more space than indexes over other datatypes. The rule of thumb is 40 bytes * the value of the RESOLUTION parameter of the index, per row.

MemSQL Procedural SQL (MPSQL) Types

Two data types are only supported in MemSQL Procedural SQL (MPSQL) scalar-valued functions and stored procedures: ARRAY and RECORD. The QUERY data type is only supported in stored procedures. For more information about these types, see the ARRAY, RECORD, and QUERY topics.

Other Types

Data Type Size Size (Not Null) Max cardinality Max values per row
ENUM 4 bytes 2 bytes 65,535 unique values 1
SET 12 bytes 8 bytes 64 unique values 64

Using the SET Data Type

The SET data type restricts the values that can be inserted for a table column, and can have zero or more string values. However, the string value must exist in the list of values specified for the column at the time of table creation.

A SET column value can contain multiple set members, separated by commas. In such a case,

  • the SET member values should not individually contain commas.
  • the SET member values can be inserted in any order. The results are retrieved in the same order as listed at the time of table creation.
  • even if a SET member value is repeated, the results display the value only once.

The following example displays the usage of the SET data type:

Create a table column with SET data type.

CREATE TABLE setexample (col SET('v1', 'v2', 'v3', 'v4'));

Insert column values as ‘v1,v2’, ‘v2,v1’, ‘v1,v4,v4’, and ‘v3,v4,v3’.

INSERT INTO setexample (col) VALUES ('v1,v2'), ('v2,v1'), ('v1,v4,v4'), ('v3,v4,v3');

The result is retrieved in the same order in which the SET member values were listed during table creation and duplicate values are ignored:

SELECT col FROM setexample;
****
+------------------------------+
| col                          |
+------------------------------+
| v1,v2                        |
| v1,v2                        |
| v1,v4                        |
| v3,v4                        |
+------------------------------+

Comparing mismatched datatypes

Using comparisons between mismatched datatypes may degrade query performance and may use unsafe type conversions which can yield undesirable query results. MemSQL will display a warning for queries with potentially problematic comparisons between mismatched datatypes in the EXPLAIN and information_schema records for the query.

These warnings do not necessarily indicate a problem, and you may have valid reasons for comparing different datatypes. But these type mismatches are flagged to help you identify potential problems that you may not be aware of.

When you see these warnings, you should check whether the datatypes are expected to be different. You may wish to consider changing the datatypes of the fields or values involved. You may also wish to consider adding explicit type conversion operations, such as the cast operators or functions like STR_TO_DATE which convert between different types.

These warnings can be seen in EXPLAIN <query>, information_schema.plancache.plan_warnings, information_schema.mv_queries.plan_warnings, and the PlanWarnings column of show plancache in textual form, as well as in EXPLAIN JSON <query>, information_schema.plancache.plan_info, and information_schema.mv_queries.plan_info in JSON form.

Example

An example of these warnings is the following:

CREATE TABLE t (id VARCHAR(50), PRIMARY KEY (id));

EXPLAIN SELECT * FROM t WHERE id = 123;
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| EXPLAIN                                                                                                                                                                                                                                                                |
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| WARNING: Comparisons between mismatched datatypes which may involve unsafe datatype conversions and/or degrade performance. Consider changing the datatypes, or adding explicit typecasts. See https://docs.memsql.com/docs/mismatched-datatypes for more information. |
|                                                                                                                                                                                                                                                                        |
| WARNING: Comparison between mismatched datatypes: (`t`.`id` = 123). Types 'varchar(50) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL' vs 'bigint(20) NOT NULL'.                                                                                                  |
|                                                                                                                                                                                                                                                                        |
| Gather partitions:all alias:remote_0                                                                                                                                                                                                                                   |
| Project [t.id]                                                                                                                                                                                                                                                         |
| Filter [t.id = 123]                                                                                                                                                                                                                                                    |
| TableScan db.t, PRIMARY KEY (id)                                                                                                                                                                                                                                       |
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+

In this example, the query involves the expression t.i = 123, where t.i is a string field. When a numeric value is compared to a string, the string is converted to a numeric value, e.g. the string '123' is converted to the number 123.

This comparison may be problematic for multiple reasons:

  • The mismatched datatypes may indicate a mistake in how the query is written or how the table is defined. The query may behave differently than intended and yield undesired results. For example, all of the strings '123', '123.0', '0123', and '123abc' compare equal to the integer 123, so while the query may be intended to retrieve a single row with the specified id, this equality comparison may actually yield multiple rows whose id values all compare equal to 123.

  • The mismatched datatypes negatively impact performance of the query. If the field and constant were either both strings or both integers, the query plan would be able to use the index to efficiently seek to lookup the matching id. But because there are actually many possible string ids that match the number 123, which do not come in any particular order in terms of string lexicographic order, the query cannot seek into the index and instead must scan all the rows of the table.