The SingleStore JDBC Driver

Driver Compatibility

The SingleStore JDBC Driver is compatible with:

Java 21, Java 17, Java 11, and Java 8
JDBC 4.2
SingleStore v7.1+

Prerequisites

To build the SingleStore JDBC Driver from source, you'll need:

Maven
Java JDK

Note

Maven is not an absolute requirement for using the driver with other applications.

Download and Install the SingleStore JDBC Driver

You can install the SingleStore JDBC Driver with any of the following methods.

Note

To find the latest version of the driver, see SingleStore JDBC Driver Releases on GitHub.

Install with Maven

Include the following dependency in your pom.xml file, to install the driver using Maven. Be sure to replace the value in <version></version> with the version you want to use:

XML

<dependency>
	<groupId>com.singlestore</groupId>
	<artifactId>singlestore-jdbc-client</artifactId>
	<version>x.x.x</version>
</dependency>

Install without Maven

If your project does not use Maven, you can download the .jar from GitHub or Maven Repository and include it in your project (install in your CLASSPATH) to use it.

Build from Source

To build the SingleStore JDBC Driver from source, follow these steps:

Clone the S2-JDBC-Connector repository using the following command:
Shell
```
git clone https://github.com/memsql/S2-JDBC-Connector.git
```
Execute the following command from the root of the repository:
Shell
```
mvn -Dmaven.test.skip -Dmaven.javadoc.skip package
```
This command generates a singlestore-jdbc-client-<version>.jar file in the target subdirectory. Install this file in a directory in your JAVA CLASSPATH to use the driver.

Use the SingleStore JDBC Driver

There are two methods to connect using the SingleStore JDBC Driver: using the DriverManager class or using a connection pool. You will also need a connection string to get a connection.

Note

To use the SingleStore JDBC Driver in external applications, specify the JDBC Driver Class as com.singlestore.jdbc.Driver

Connection String Format

The connection string must have the following format:

JDBC

jdbc:singlestore:[loadbalance:|sequential:]//<hostDescription>[,<hostDescription>...]/[database][?<key1>=<value1>[&<key2>=<value2>]]

hostDescription:
    <host>[:port] | address=(host=<host>)[(port=<port>)][(type=(master|slave))]

The default for port is 3306. The default host type is master.
The host must be an IP address or DNS name. If the host is an IPv6 address, then it must be enclosed within square brackets.

See Connection String Parameters for more information. Here's a sample connection string:

JDBC

"jdbc:singlestore://localhost:3306/test?user=root&password=myPassword"

Connect using the `DriverManager` Class

The DriverManager class automatically configures the application and loads the SingleStore JDBC Driver. Here is some sample code that uses the DriverManager class:

Java

Connection connection = DriverManager.getConnection("jdbc:singlestore://localhost:3306/test?user=root&password=myPassword");
Statement stmt = connection.createStatement();

ResultSet rs = stmt.executeQuery("SELECT NOW()");
rs.next();
System.out.println(rs.getTimestamp(1));

Connect using the Connection Pool

You can also get a connection with SingleStore JDBC Driver via a connection pool. There are two DataSource implementations that you may choose from to use a connection pool.

The SingleStoreDataSource is a basic implementation that returns a new connection each time the getConnection() method is called.
The SingleStorePoolDataSource is a connection pool implementation that maintains a pool of connections. A connection is borrowed from the pool each time a new connection is requested.

Failover and Load-Balancing Modes

The SingleStore JDBC Driver supports the following failover/load-balancing modes:

Mode	Description
`sequential`	In this mode, the driver tries to connect with the hosts in the order in which they are declared in the connection string. Hence, the first available host is used for all the queries.
`loadbalance`	The driver randomly selects a host from the connection string, for each connection, to perform load-balancing on all the queries. Hence, the queries are load-balanced by randomly distributing the connections across all the hosts.

Connection String Parameters

The SingleStore JDBC Driver supports the following parameters in the connection string.

Essential Parameters

Parameter	Description	Default Value	Supported Driver Version
`user`	Username for the database.		1.0.0+
`password`	The password of the database user.		1.0.0+
`connectTimeout`	The connection timeout value (in ms). Set to `0` to disable connection timeout.	30000	1.0.0+
`useServerPrepStmts`	Enables using PrepareStatements. PrepareStatements are pre-compiled on the server-side before executing. Applications that use the same queries repeatedly can enable this option. In general, it's preferable to leave this parameter as FALSE, because SingleStore has wider support of queries in text protocol and has internal mechanisms of query parameterization.	`FALSE`	1.0.0+
`allowLocalInfile`	Allows users to load data from the local filesystem. See LOAD DATA for more information on loading data into SingleStore.	`FALSE`	1.0.0+

TLS Parameters

Parameter	Description	Default Value	Supported Driver Version
`sslMode`	Specifies the SSL/TLS mode. It can have one of the following values: `disable`: Disable the use of SSL/TLS. `trust`: Use SSL/TLS only for encryption, and do not perform certificate or hostname verification. SingleStore does not recommend this mode for production environments. `verify-ca`: Use SSL/TLS for encryption and perform certificate verification, but do not perform hostname verification. `verify-full`: Use SSL/TLS for encryption, certificate verification, and hostname verification. The following parameters can override the behavior of `sslMode`: `useSsl` `disableSslHostnameVerification` `trustServerCertificate` Refer to `sslMode` and `useSsl` Behavior for more information.	`disable`	1.0.0+
`enabledSslCipherSuites`	Specifies a comma-separated list of TLS ciphers. If specified, forces the TLS protocol to only use the specified ciphers. For example, `"TLS_DHE_RSA_WITH_AES_256_GCM_SHA384, TLS_DHE_DSS_WITH_AES_256_GCM_SHA384"`		1.0.0+
`enabledSslProtocolSuites`	Specifies a comma-separated list of TLS versions. If specified, forces the TLS protocol to only use the specified version(s). For example, `"TLSv1, TLSv1.1, TLSv1.2"`		1.0.0+
`keyStore`	Specifies the path of the `keyStore` file that contains the client private keys and associated certificates.		1.0.0+
`keyStorePassword`	Specifies the password for the `keyStore` file.		1.0.0+
`keyStoreType`	Specifies the key store type, for example, JKS and PKCS12.		1.0.0+
`keyPassword`	Specifies the password for the private key in the client certificate `keyStore` file.		1.2.1+
`serverSslCert`	Use this parameter to specify the server's certificate in DER format or specify the server's CA certificate. The server is added to `trustStor`, which allows the connection to trust a self-signed certificate. You can specify the server certificate in one of the following formats: Specify the complete path: `serverSslCert=/full_path/cert.pem` Specify a relative path: `serverSslCert=classpath:relative/cert.pem` Specify a DER-encoded certificate string: `"------BEGIN CERTIFICATE-----"`		1.0.0+
`trustStore`	Specifies the path of the `trustStore` file, and uses the specified file for trusted root certificates. If this parameter is set, it overrides the `serverSslCert` parameter.		1.1.4+
`trustStorePassword`	Specifies the password for the trusted root certificate file.		1.1.4+
`trustStoreType`	Specifies the trust store type, for example, JKS and PKCS12.	`null`	1.1.4+
`disableSslHostnameVerification`	Disables hostname verification against the server's identity as specified in the server's certificate to prevent man-in-the-middle attacks. This parameter is effective only when the `useSsl` parameter is enabled. Refer to `sslMode` and `useSsl` Behavior for related information.	`false`	1.0.0+
`trustServerCertificate`	Enable this parameter to skip checking the server's certificate when used in conjunction with SSL/TLS. This parameter is effective only when the `useSsl` parameter is enabled. Refer to `sslMode` and `useSsl` Behavior for related information.	`FALSE`	1.0.0+
`useSsl`	Force enables SSL/TLS on the connection. Use `useSSL` as an alias for this parameter. Refer to `sslMode` and `useSsl` Behavior for related information.	`FALSE`	1.0.0+

`sslMode` and `useSsl` Behavior

The sslMode and useSsl parameters can both be used to enable SSL/TLS on the connection. However, the useSsl parameter can override the value of sslMode parameter when used in conjunction with the disableSslHostnameVerification and trustServerCertificate parameters.

The following table shows the equivalent sslMode for different combinations of useSsl, disableSslHostnameVerification, and trustServerCertificate

`useSsl`	`trustServerCertificate`	`disableSslHostnameVerification`	Equivalent `sslMode`
`FALSE`	Ignored	Ignored	`disable`
`TRUE`	`TRUE`	Ignored	`trust`
`TRUE`	`FALSE`	`TRUE`	`verify-ca`
`TRUE`	`FALSE`	`FALSE`	`verify-full`

Pool Parameters

Parameter	Description	Default Value	Supported Driver Version
`pool`	Specifies that the connection uses a connection pool. Enable this option to use a connection object, but not a `DataSource` object.	`FALSE`	1.0.0+
`poolName`	Specifies the pool name that allows identifying threads. The `poolName` is auto-generated by default.	SingleStore-pool-<pool-index>	1.0.0+
`maxPoolSize`	Specifies the maximum number of physical connections for a connection pool.	8	1.0.0+
`minPoolSize`	Specifies the minimum number of physical connections that must always be available in a connection pool. `minPoolSize` should never be greater than `maxPoolSize`.	`maxPoolSize`	1.0.0+
`poolValidMinDelay`	Disables connection state validation for connections that request a new connection within the time limit specified through `poolValidMinDelay`. The time limit must be specified in ms. If set to `0`, each connection request is validated.	1000	1.0.0+
`maxIdleTime`	Specifies the maximum amount of time (in `seconds`) a connection can stay in the pool in idle state. This parameter can be set to a minimum of 2 seconds.	600	1.0.0+
`useResetConnection`	When enabled, resets the connection state, deletes the prepare command, resets the session variables, and removes the user variables. User variables are removed only when the server allows deleting them.	`FALSE`	1.0.0+

Log Parameters

Parameter	Description	Default Value	Supported Driver Version
`log`	Enables information logging.	`FALSE`
`maxQuerySizeToLog`	Specifies the size of the query statement to include in the log.	1024	1.0.0+
`slowQueryThresholdNanos`	Logs queries with execution time greater than the value specified using this parameter.	1024
`profileSql`	Enables logging the query execution time.	`FALSE`

Other Parameters

Parameter	Description	Default Value	Supported Driver Version
`allowMultiQueries`	Enables multi-query statements.	`FALSE`	1.0.0+
`dumpQueriesOnException`	Enables logging the query string when an exception is thrown during query execution.	`FALSE`	1.0.0+
`socketFactory`	Specifies the name of the custom socket factory to use. Specify the full name of the class that implements `javax.net.SocketFactory`.		1.0.0+
`tcpKeepAlive`	Enables `TCPKeepAlive` for the JDBC client to keep idle TCP connections connected.		1.0.0+
`tcpAbortiveClose`	Resets TCP connections (through abort or hard close) instead of orderly closing connections. This option is useful in environments where connections are opened and closed frequently. In such environments, it may not be possible to create new sockets because all ports are used by connections in `TCP_WAIT` state.		1.0.0+
`tinyInt1isBit`	Maps MySQL Tiny data type to BIT (boolean) data type.	`TRUE`	1.0.0+
`transformedBitIsBoolean`	Maps the `TINYINT` data type transformed using `tinyInt1isBit` from `BIT` to `BOOLEAN`. This parameter is effective only when `tinyInt1isBit` is enabled. A `TINYINT` value of `0` is considered `FALSE`, and non-zero values are considered `TRUE`.	`FALSE`	1.2.0+
`yearIsDateType`	Converts year values from numerical to `DATE` type.	`TRUE`	1.0.0+
`sessionVariable`	Sets SingleStore session variables specified as <var_name> = <value> pairs.
`localSocket`	Enables connecting to a database socket via a UNIX domain socket (if allowed by the server).		1.0.0+
`localSocketAddress`	Binds the specified hostname or IP address to a local (UNIX domain) socket.		1.0.0+
`socketTimeout`	Specifies the network socket timeout (in ms). If set to `0`, socket timeout is disabled.	0	1.0.0+
`cachePrepStmts`	If `useServerPrepStmts` is set to `TRUE`, enabling `cachePrepStmts` caches prepared statements in a LRU cache to avoid preparing the query again, which allows the server from re-parsing a query.	`TRUE`	1.0.0+
`prepStmtCacheSize`	If `useServerPrepStmts` is set to `TRUE`, `prepStmtCacheSize` specifies the prepared statement cache size.	250	1.0.0+
`connectionAttributes`	Set client information in `key:value` pair format, when `performance_schema` is enabled. This is currently only enabled on the client side (does not send the key:value pairs to the server). Best practice is to use this parameter to identify the calling client for special handling in the driver and in future telemetry information for SingleStore.		1.0.0+
`autocommit`	Sets the `autocommit` value to the default value on connection initialization.	`TRUE`	1.0.0+
`includeThreadDumpInDeadlockExceptions`	Adds thread dump to exception trace log in case of a deadlock exception.	`FALSE`	1.0.0+
`useReadAheadInput`	Enables using a buffered `inputStream` to read available socket data	`TRUE`	1.0.0+
`defaultFetchSize`	Calls the `setFetchSize(n)` method with the value specified using the `defaultFetchSize` parameter.	0	1.0.0+
`blankTableNameMeta`	Returns a blank value for table name in the `getTableName` metadata result set.	`FALSE`	1.0.0+
`tlsSocketType`	Uses the TLS `com.singlestore.jdbc.tls.TlsSocketPlugin` plugin. The plugin must be added to `CLASSPATH`.		1.0.0+
`credentialType`	Specifies the credential plugin type. The plugin must be added to `CLASSPATH`.		1.0.0+
`rewriteBatchedStatements`	If enabled, sends multiple rows in a single query. Note that, if the `useServerPrepStmts` parameter is enabled, `rewriteBatchedStatements` has no effect (it is ignored). The queries must be specified in the `INSERT INTO <table-name> (column-list) VALUES (...)` format.	`FALSE`	1.1.5+
`createDatabaseIfNotExist`	When enabled, the database specified in the connection string is created if it doesn't already exist.	`FALSE`	1.1.9+
`initSql`	Specifies the commands to run when a new connection is created.		1.1.9+
`consoleLogLevel`	Specifies the console log level. It can have one of the following values: `ERROR`, `WARN`, `INFO`, `DEBUG`, and `TRACE`. If the `consoleLogLevel` and `consoleLogFilepath` parameters are set to `NULL`, the SLF4J logger is used.	`INFO`	1.1.6+
`consoleLogFilepath`	Specifies the path of the console log file. If the `consoleLogLevel` and `consoleLogFilepath` parameters are set to `NULL`, the SLF4J logger is used.	`NULL`	1.2.0+
`printStackTrace`	When enabled, it prints the stack trace for the `TRACE` log level.	`FALSE`	1.1.9+
`maxPrintStackSizeToLog`	Limits the number of stack trace lines to log.	`10`	1.1.9+
`maxAllowedPacket`	If enabled, allows the driver to avoid sending commands with packet size greater than max_allowed_packet and throw an error instead of dropping the connection. If this parameter is not set or set to `NULL`, it is ignored.		1.2.0+
`transactionReplay`	Specifies if the current transaction can have a completely transparent failover. To enable this parameter, all the commands must be idempotent (return the same result at each run).	`FALSE`	1.0.0+
`transactionReplaySize`	Specifies the maximum size limit for the replay cache buffer. If a transaction exceeds the specified limit and a failover occurs, the transaction throws an exception and it is not replayed.	`64`	1.2.0+

Failover and Load Balancing Parameters

Parameter	Description	Default Value	Supported Driver Version
`retriesAllDown`	Specifies the maximum time until the driver retries connection attempts before throwing an exception, when the driver is performing a failover and all hosts are down.	120	1.0.0+

On this page

Driver Compatibility

Prerequisites

Download and Install the SingleStore JDBC Driver

Use the SingleStore JDBC Driver

Connection String Format

Connect using the `DriverManager` Class

Connect using the Connection Pool

Failover and Load-Balancing Modes

Connection String Parameters

Essential Parameters

TLS Parameters

`sslMode` and `useSsl` Behavior

Pool Parameters

Log Parameters

Other Parameters

Failover and Load Balancing Parameters

Was this article helpful?

On this page

Was this article helpful?

The SingleStore JDBC Driver

On this page

Driver Compatibility

Prerequisites

Download and Install the SingleStore JDBC Driver

Use the SingleStore JDBC Driver

Connection String Format

Connect using the DriverManager Class

Connect using the Connection Pool

Failover and Load-Balancing Modes

Connection String Parameters

Essential Parameters

TLS Parameters

sslMode and useSsl Behavior

Pool Parameters

Log Parameters

Other Parameters

Failover and Load Balancing Parameters

Was this article helpful?

On this page

Was this article helpful?

Connect using the `DriverManager` Class

`sslMode` and `useSsl` Behavior